VDO Dayton PC 5200 TSN GPS Receiver User Manual


  Open as PDF
of 2
 
Features
• Detailed vehicle settings
• Vehicle type-specific route calculation
• Vehicle-specific restriction signs displayed in map
• Truck-specific Points of Interest (POIs)
• Set-up, control and display of travel and rest times
• Setting for load/unload times
• Pictogram- and Voice Guidance
• Route Criteria:
- Fast route
- Short route
- Prefer
highways
- Avoid
highways
- Avoid toll roads
- Optimized for traffic situation
• Independent selection of 14 languages
and 21 voices
• Dynamic Navigation
•
Alternative Route Calculation (automatic, manual)
• Traffic Information (via integrated TMC Receiver)
- Presentation on map
- Traffic information on route
- Detailed event information
- Detour calculation
• 2D/3D Map View
• Colorful map presentation with adjustable scale
(50 m ... 1,000 km)
• Address Book for 200 entries
(categories: Home, Work, Business, Private)
• Tour Book: Up to 10 tours
with maximum 40 waypoints each
•
Recent Destinations: 20
• Selectable status information for four info status
fields (time, date, travel distance, dynamic travel
time, delay time, dynamic arrival time, altitude
above sea level, current speed)
• Demo Mode
Technical Data
• Power Supply
- 12 V DC, - at GND
- Voltage Range: 10.5 V – 14.4 V at GND
- Current Consumption: < 1 mA
• FM-RDS-TMC Band: 87.5 – 107.9 MHz
• GPS Band: 1.53 GHz
• RGB Output: Siemens VDO navigation configuration
• RGB C-Sync on 16-pin Mitsumi connector
• Storage Medium:
Secure Digital (SD) Card, max. 2 GB
• Sensors
- 12-channel GPS receiver
- Gyroscope
- Speed signal interface (digital, analogue)
• Status LED
• Temperature range: -20° C ... +60° C
• Turnable Gyro
• Connections:
- Video-Out / Monitor: RGB, CVBS (NTSC)
- Audio: 1 x 5 Wpp @ 4 Ohms
(external loudspeaker)
- GPS Antenna (SMB)
- FM Antenna (SMB)
- ISO A & B Connector
• Dimensions (W x D x H): 132 x 120 x 37 mm
(w/o connectors)
Package Content
• 1 x PC 5200 CMN/40
• Installation Material
(4 screws, 2 x magic tape)
• 1 x Power Cable
• 1 x Signal Cable
• 1 x GPS Antenna
• 1 x Installation & User Manual
• 1 x Infrared Remote Control RC 5400
w/o batteries
• 1 x Installation Assistant DVD
• 1 x Quick Start Guide laminated and ready to file
• 1 x TMC Arial MA 6452 / 40
• 1 x SRT 5200/40
• 1 x Remote Control RCD 3200/01
• 1 x SD Card with truck-specific map data
• 1 x DVD with map data and languages files
for back-up
Options
1
• FM Signal Splitter – MA 1452 DIN/40 or
MA 1452 FKR/40
• Video components
(e.g. TV Tuner, Reversing Camera)
• IR Steering Wheel Remote Control
Sales Packages
• MS5200NTFETSN
PC 5200 TSN with MM 5300 5.8" Monitor
•
MS5200XLNTFETSN
PC 5200 TSN with MM 5500 7" Monitor
•
MS6100NTFETSN
PC 5200 TSN with VRM 6100 1DIN-Moniceiver
and 7
" Slide-out Touchscreen Display
Other Available Monitors
• MM 5600
- 6.5
" TFT Slide-Out Monitor, 16:9 Format
- 1DIN sized
- RGB, PAL/NTSC
- Integrated loudspeaker/infrared eye
- Automatic Display Brightness Control
•
MM 5200
- 3.6
" TFT Monitor, 16:9 Format
- PAL/NTSC
- Integrated Infrared Eye
- Automatic Display Brightness Control
- Detachable Screen
1
Additional adapter cables required
Truck Navigation Computer
PC 5200 TSN
Technical Information
11/2007 • PC 5200 TSN • Subject to modification
 previous