Filter
Top Products
®
VS1124XR Operating Guide
Page 5
This is useful if you know, based on experience,
that your shock, glass-break, or other add-on
sensor will false trigger, such as when you park
near a construction site or other harsh environ-
ment.
To bypass your alarm's sensors,
1. Press button #1 to arm the alarm. The siren
chirps and the parking lights flash once (three
times if a zone is bypassed) to confirm
armed.
2. Within 3 seconds, press button #2.
The siren chirps 3 times and the parking
lights flash 3 times to confirm sensors are
bypassed.
To trigger the alarm in an emergency (armed or
disarmed), press and hold remote control button
#1 for 3 seconds. The siren sounds and the
parking lights flash for about 30 seconds. Stop
the siren and the parking lights any time by
pressing button #1 again.
Regardless of whether the alarm was armed or
disarmed when panic was acticvated, the doors
will unlock (if the remote controlled door locks
are connected).
Button #1
EMERGENCY CALL FOR HELP (PANIC)
SENSOR BYPASS
NEXT - Press
Button #2
(within 3
seconds)
FIRST - Press
Button #1
The sensors are automatically restored next
time the alarm is armed.
DISARMING
To disarm the alarm, press button #1.
The siren chirps twice, the parking lights flash
twice, and the LED turns OFF.
Button #1
q Auto Re-Arm - After disarming, if your
alarm has been set to auto re-arm, a 30
second automatic re-arming period begins.
After 30 secs. the alarm will automatically
re-arm.
Once re-armed, the siren chirps and the
parking lights flash one time, and the LED
starts flashing.
Note - Opening a door within 30 seconds
will cancel auto re-arm and the alarm will
be completely dis-armed.
q Auto Re-Lock - After disarming, if the
alarm has been connected with optional
central locking, the doors will re-lock
automatically after 30 seconds (unless a
door is opened).