Filter
Top Products
CONNECTIONS
FRONT PANEL
BACK PANEL
23. MICROPHONE SOCKET
24. EXTERNAL SPEAKER JACK -
25. ANTENNA CONNECTOR
26. DC POWER CORD
The microphone plug is inserted into this socket.
used for remote receiver monitoring. When the external speaker is connected, the
internal speaker is automatically disconnected. The connecting wire must use a 3.5mm miniature plug only.
- Connect the Antenna here using a standard UHF (PL259) type connector.
- DC Power is connected to the transceiver through this jack. A power cord is supplied with the
transceiver.
Controls/Indicators/Connections
5
UNIDEN UHF CB Transceiver
23
24
26
25