Filter
Top Products
2. Press LOCKOUT again to unlock the displayed
channel.
L/O
no longer appears in the display.
Restore All Locked Out Channel
To unlock all channels, you must be in the Manual Mode.
1. Press MANUAL.
2. Press and hold LOCKOUT to unlock all
channels. The L/O indicator goes out on any
channel previously locked out.
DELAY
In the Scan Mode, the delay feature causes the scanner to remain on the frequency 2 seconds
after end of the transmission to wait for a possible reply. A Delay function can be set for each
programmed channel so that when searching stops on a channel there is a brief pause before
the scanning resumes. The delay can be set when your scanner stops on a channel while
scanning or when a channel is selected by Manual mode.
19
BC248clt.qxd 3/8/00 7:19 PM Page 19