Uniden 100xr Automobile Alarm User Manual


 
VS1100XR Operating Guide
®
Page 8
F. Valet mode indicator — Flashes slowly if
the ignition switch is turned OFF.
G. AEI mode indicator
If the Automatic Engine
Immobiliser is engaged the LED will be ON.
H. Triggered zone indicator — If the alarm
has been activated, the LED will flash for 30
secs. after the alarm has been disarmed.
EG...
1 flash current sensor activation
2 flashes
ignition/panic activation
3 flashes
shock activation
4 flashes
door /boot activation
A. Arming indicator — Flashes quickly
during the 30-second re-arm or passive
arming countdown.
B. Door open indicator — OFF when a
hardwired door is opened during the 30-
second re-arm or passive arming
countdown.
C. Armed indicator — Flashes when the
alarm is armed.
D. Disarmed indicator — OFF when the
alarm is disarmed.
E. RF reception indicator — ON while the
remote control button is pressed.
Don't forget the ACCESSORIES!
Engine Immobiliser
Relay & Socket set
(SEA865)
Provides additional
protection by disabling
the vehicles starter
motor.
Make your alarm
YOUR alarm!
Your dealer has a wide variety of accessories
which can increase your alarm's security and
convenience. Ask for more information. And
insist on GENUINE UNIDEN accessories!
Dual-stage
microwave sensor
(SEA259)
- Detects movement
inside vehicle.
Great for extra
protection and for
open-top vehicles.
Appendix 2 - UNDERSTANDING THE LED FLASHES
Garage Door and
House Alarm
interface (SEA910)
- Allows your remote to
control your garage
door opener or house
alarm.
3 Button Remote
(SEA933)
Get one for everyone
who drives your car.
(2 included with the
alarm)
Dual-stage glass-
break sensor
(SEA857)
- Detects the high-
frequency sound of
glass breaking.
NOTE  The accessories on this page are optional.
Central Lock Interface
(SEA169) and
Door Lock Motor
(SEA170)
- Maybe required on
some vehicles. Check
with your dealer for
more information.
Back up Battery Siren
(SEA400)
- Protects your car
even if the main
vehicle battery is cut.