Tyco H9290-0920G1 Motorized Toy Car User Manual


 
III. BATTERY INSTALLATION
Requires
3 AA alkaline batteries
for the vehicle and
2 AA alkaline batteries for the transmitter. Batteries
not included.
Vehicle
1. Use a screwdriver (not included) to unscrew
the power clip cover screw, remove the
battery cover.
2. Install 3 AA batteries (not included), with
polarity (+/-) as shown inside the battery
compartment.
3. Replace the battery door.
Transmitter
1. Remove the battery cover as shown.
2. Install 2 AA batteries (not included), with
polarity (+/-) as shown inside the battery
compartment.
3. Replace the battery cover.
*
Once the batteries are installed the transmit-
ter will always be “ON” and will work auto-
matically the moment you use it.
ì
IV. CONSUMER INFORMATION
Note to adults: To ensure that the child’s play is
both safe and fun, please review all operating
instructions and safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets! They’re
for real cars!
• DO NOT pick up vehicle while in motion.
XCAUTION: To prevent entanglement,
keep hair away from wheels.
• Keep fingers, hair and loose clothing away from
the tires and the wheel hubs while the vehicle
is switched ON.
• Adult supervision is recommended when this
vehicle is being operated.
• To avoid accidental operation, remove all
batteries when not
in use. Always turn the
vehicle OFF before removing batteries.
X
X
FORWARD REVERSE
SIMPLE TURNING
LEFT
FORWARD
REVERSE
LEFT
RIGHT
FORWARD
REVERSE
LEFT
RIGHT
FORWARD
REVERSE
LEFT
RIGHT
FORWARD
REVERSE
LEFT
RIGHT
II. VEHICLE OPERATION
SIMPLE TURNING
RIGHT
X
A
B