Filter
Top Products
TOYOTA L/C 6 CYLINDER ENGINE
USING THE NV4500 5 SPEED TRANSMISSION
ADVANCE ADAPTERS INC. P/N: 712578
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 3 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-15-95
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service manual
pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships and
parts stores.
NOTES:
1. The original bellhousing mounts are removed from frame to allow for new bellhousing
clearance.
2. A new rear mount on the back side of transfer case #716022-TSW will be required on FJ40.
FJ40 with split T/C 19 spline and FJ60 will need new crossmember under adapter.
3. Longer speedometer cable and emergency brake cables are available from B.T.B. Products.
4. To maximize clutch engagement, slave cylinder works best when installed to inner slot.