Filter
Top Products
TOPCOM MM-1000
ENGLISH
4.3 Using the massager
After installing batteries:
• Press the On/Off button (1) to activate the vibration. The massage heads will
illuminate.
• Press the On/Off button (1) again to deactivate the vibration.
4.4 How and where to massage
• Keep the massager still on one of the next spots for approximately 30 seconds
then move it onto the next part that needs massaging.
• Apply little pressure at first.
• It is very important that the part you are massaging is relaxed. When you hold a
massager, the shoulder on the side you hold the massager with will tighten.
Therefore you should hold the massager with the opposite hand.
• Never press too hard.
4.5 Technical data
1. Neck
2. Back
3. Waist
4. Palm
5. Sole
6. Calf
7. Thigh
8. Arm
9. Neck and shoulder
Dimensions (W/H/D)
Weight
Power supply
90 x 90 x 70 mm
147 g (without batteries)
3 x AAA (1,5V)
1
2
3
4
5
6
7
8
9