Filter
Top Products
9490-A T2 Instruction Manual
Page 7 of 12
Transport T
2
Hitch Mount Bicycle Rack
Assembl
y
&
Use
Part Number Description Image
Use
260123 2” Hitch extension
Provides 9-½” of extension.
Allows clearance for spare tires
mounted on the rear of a car or
if hitch receiver is not mounted
flush with the bumper. Note:
This may make rack more
vulnerable to contacting the
pavement when encountering
road irregularities.
Use ONLY with Sportworks
racks.
260125
1 ¼” Hitch Extension
Provides 7-3/8” of extension.
Allows clearance for spare tires
mounted on the rear of a car or
if hitch receiver is not mounted
flush with the bumper. Note:
This may make rack more
vulnerable to contacting the
pavement when encountering
road irregularities.
Use ONLY with Sportworks
racks.
260113 2” Riser Extension
Hitch base mounts directly into
the riser extension. It provides
9-1/3” of extension and 5 ¼” of
rise.
Use ONLY with Sportworks
racks.
260126 2” High Rise Hitch Base
Replaces hitch base that comes
with the rack. See pg 5 for
mounting instructions. Adds 6” of
rise. Reuses all the existing
hardware. Does not increase
extension. Best solution for
ground clearance issues.
260103 2” Hitch Base
Use this part to convert your rack
from a 1-1/4” to a 2” hitch size.