Tecumseh OH195SA/OH195SP (OHSK50-75) Automobile Parts User Manual


 
Page 18 4-Cycle • Snow King Engine 181-1275-14
I. Oil Fill Cap/Dipstick
If your engine has an oil fill cap/dipstick go to step 1.
If your engine does NOT have an oil fill cap/dipstick,
see "II. Oil Fill Cap/Plug" instructions on page 20.
1. Carefully disconnect spark plug wire and keep it away
from spark plug. See Figures 38 and 39. See “G. Avoid
Accidental Starts” instructions on page 2. Afterward,
continue reading instructions below.
Keep the disconnected spark plug wire
securely away from metal parts where arcing
could occur.
Carefully attach the spark plug wire to the
grounding post, if provided.
2. Be sure fuel fill cap is on and tightened securely.
See Figure 40. See Figure 14 on page 7. Afterward,
continue reading instructions below.
3. Be sure you find the correct oil drain plug location, if
present (see equipment manufacturer’s instructions).
See Figure 41. See Figure 14 on page 7. Afterward,
continue reading instructions below.
4. Clean area around oil drain plug.
Figure 38. Disconnecting/Connecting Spark Plug
Figure 39. Typical Spark Plug Connection
Figure 40. Fuel Fill Cap
Figure 41. Oil Fill/Drain Locations
S
TO
P
STOP
1. Oil Fill Cap/Dipstick
2. Oil Fill Cap/Plug
3. Oil Drain Plug
1
3
2
3
Back View
2
33
Angled Front View