Filter
Top Products
Figure 10
Section 5. Using the 400 lb Spreader (PN 84015 or 84019)
Step 1. Connect the Spreader wiring harness to your ATV’s power
supply. WARNING: RUN ALL WIRING HARNESSES AWAY
FROM MOVING PARTS!
Step 2. Seed Flow is controlled by the central lever. All the way back
against the spreader is off (See Figure 12). All the way forward is
maximum ow (See Figure 13).
Step 3. Turn on spreader motor before opening the Seed Flow gate.
Figure 11
Figure 12
Figure 13