2.2. In stal la tion
For in stal la tion, the wall sup port flange (A) is used.
F
In stall the safety fil ter by means of four screws which guar an -
tee a car ry ing ca pac ity of at least 100 kg (220 lbs.).
In stall the safety fil ter in the suc tion tube di rectly be fore the vac uum gen er a tor.
Con nect the line to the con veyor units to the tube of the hop per loader (B) by
means of a flex i ble hose. Screw both parts to gether by means of a hose clamp.
Con nect the line to the vac uum gen er a tor to the tube of the com pressed-air valve
(C) by means of a flex i ble hose. Screw both parts to gether by means of a hose
clamp.
a536-3MS
SFC-A
In stal la tion in struc tions 17
SFC-A
C
B
A