Filter
Top Products
24 ► HSX User Manual
ATTACHMENT HOLE PATTERNS
Hole patterns shown below for pile-driving attachments.
D
C
B
A
D
C
B
A
1
3
45
678
12
34
56
78
2
12.000
17.500
REV. BY DATE PCRN# DESCRIPTION
1 RN 7/3/13 28782_01 INITIAL RELEASE
NOTES:
HYDRAULIC
TOOLS
NOTE: ALL DIMENSIONS ARE GIVEN IN INCHES AND
DEFINE THE FINISHED PART. TOLERANCES AND SURFACE
ROUGHNESS IS SPECIFIED BELOW (EXCEPT AS NOTED):
WEIGHT: LBS
2687.0
SCALE:
0.250
DRAWN BY:
RN
MATERIAL CODE:
CONFIDENTIAL - THIS DOCUMENT AND ALL
INFORMATION CONTAINED HEREIN IS THE
PROPERTY OF THE STANELY WORKS AND MAY
NOT BE DISCLOSED TO UNAUTHORIZED
PERSONS OR REPRODUCED BY ANY MEANS, OR
USED FOR ANY PURPOSE OTHER THAN THAT
SUBMITTED WITHOUT EXPRESS WRITTEN
PERMISSION FROM THE STANLEY WORKS.
DECIMALS +/-.020
ANGLES +/-1°0'
BREAK ALL SHARP EDGES:
.010 R. MAX OR .010 x 45°
SURFACE ROUGHNESS: 125
TITLE:
HSX22125SP FINAL ASSY
SHEET:
1 OF 1
SIZE:
D
DATE:
07/03/13
REVISION:
1
PART NUMBER:
73091
COATING CODE:
ITEM
PART
NO
QTY. DESCRIPTION
1 HSX22125S 1 SHAKER FLAT TOP STANLEY
D
C
B
A
D
C
B
A
1
3
45
678
12
34
56
78
2
7.500
13.500
REV. BY DATE PCRN# DESCRIPTION
1 RN 7/3/13 28782_01 INITIAL RELEASE
NOTES:
HYDRAULIC
TOOLS
NOTE: ALL DIMENSIONS ARE GIVEN IN INCHES AND
DEFINE THE FINISHED PART. TOLERANCES AND SURFACE
ROUGHNESS IS SPECIFIED BELOW (EXCEPT AS NOTED):
WEIGHT: LBS
1373.7
SCALE:
0.375
MATERIAL CODE:
CONFIDENTIAL - THIS DOCUMENT AND ALL
INFORMATION CONTAINED HEREIN IS THE
PROPERTY OF THE STANELY WORKS AND MAY
NOT BE DISCLOSED TO UNAUTHORIZED
PERSONS OR REPRODUCED BY ANY MEANS, OR
USED FOR ANY PURPOSE OTHER THAN THAT
SUBMITTED WITHOUT EXPRESS WRITTEN
PERMISSION FROM THE STANLEY WORKS.
DECIMALS +/-.020
ANGLES +/-1°0'
BREAK ALL SHARP EDGES:
.010 R. MAX OR .010 x 45°
SURFACE ROUGHNESS: 125
TITLE:
HSX6125SP FINAL ASSY
SHEET:
1 OF 1
SIZE:
D
DATE:
07/03/13
REVISION:
1
PART NUMBER:
73089
DRAWN BY:
RN
COATING CODE:
ITEM
PART
NO
QTY. DESCRIPTION
1 HSX6125S 1 SHAKER FLAT TOP STANLEY
HSX3, HXS6 & HSX11 WITH HOLE PATTERN
CENTERED ON SHOE WELDMENT
HSX22 WITH HOLE PATTERN CENTERED ON
SHOE WELDMENT
4 x 7/8 DRILL THRU
4 x DRILL 1-5/16 THRU