Filter
Top Products
PRE-FLIGHT CHECK
1. Ensure that the STUNT FLAP is LEVEL
(or ALIGNED WITH) the HORIZONTAL TAIL WING.
Adjustments can be made by turning
the STUNT FLAP ADJUSTMENT KNOB.
• Turning the STUNT FLAP ADJUSTMENT
KNOB counter-clockwise will adjust the
STUNT FLAP upwards.
• Turning the STUNT FLAP ADJUSTMENT
KNOB clockwise will adjust the STUNT
FLAP downwards.
Stunt Flap
Horizontal
Tail Wing
2. HORIZONTAL TAIL WING, VERTICAL
TAIL WING and MAIN WING are straight
(not bent or twisted).
3. Both PROPELLERS can spin freely.
Main Wing
Propeller Propeller
Vertical Tail Wing
Horizontal
Tail Wing
Stunt Flap
Adjustment
Knob
Stunt Flap
Downward
Stunt Flap
Adjustment
Knob
Stunt Flap
Upwards
INCORRECT ALIGNMENTCORRECT ALIGNMENT
IF THE FLYING HEIGHT IS TOO LOW OR THE PLANE DOES NOT CLIMB,
THE STUNT FLAP MAY NOT BE HORIZONTAL. ADJUST THE STUNT
FLAP UPWARD UNTIL IT IS LEVEL WITH THE HORIZONTAL TAIL WING.
SETTING UP YOUR SKYWINDER
TM
FOR INDOOR TRAINING continued
STEP 4
STEP 3
Turn the plane’s
ON/OFF SWITCH
to “ON”.
Turn the controller’
s ON/OFF SWITCH
to “ON”.
NOTE: You are now ready to practice
flying on your INDOOR TRAINER!
Please refer to Page 4 for Basic
Controls.
ON/OFF
Switch