Filter
Top Products
5
LOW FLANGE HUB MAINTENANCE - ASSEMBLY
5
GREASE
GREASE
17mm
Recommended Torque:
80 in-lbf (9.0 N-m)
Maximum Torque:
90 in-lbf (10.2 N-m)
6
• Finger tighten drive side axle nut, use 10mm Allen in axle.
• Check for bearing play, wiggle back and forth.
• Rear wheel: Do not install cassette immediately.
• Install the wheels in the front and rear dropouts, check for any bearing play at the rim. If any play is felt, remove wheel and repeat
adjustment steps.
• Install cassette on rear hub.
LOW FLANGE FRONT HUB:
Follow the same assembly/disassembly steps as the rear hub.
One side Alloy axle cap: non-adjustable.
Other side Steel axle cap: adjustable, same as rear hub.
• Unlock and unthread adjustable axle cap.
• Push axle out with thumb.
• Service bearings same as rear hub.
GREASE
GREASE
GREASE
GREASE
GREASE
4
GREASE
Seal and pawl
mechanism
Bearing
surface
NOTE: Use a low viscocity grease
5mm Allen key
Bearing
surface
10mm Allen key