Filter
Top Products
13
4 Remove the battery.
5 Insulate the connector terminal by
wrapping with a tape.
Notes
• Be sure to remove the battery with the case
attached.
• Do not damage the battery with a sharp object such
as a screw driver.
NV-U74T
1 Press the RESET button to turn off the
unit.
2 Remove the 4 rubber plugs on the rear
of the unit, then the 4 screws using a
screw driver.
3 Remove the rear cover.
Use a sharp object, such as a flat head screw
driver, in the places shown in the illustration
to release the catches and open the rear cover.
4 Remove the battery.
5 Insulate the connector terminal by
wrapping with a tape.
Note
Do not damage the battery with a sharp object such
as a screw driver.
1
3
2
1
2