Filter
Top Products
Connect the Broadband radar to your display
HDS (USA only)
Broadband radar scanner Adapter cable
000-0127-56
2 m (6 ft)
Optional Lowrance 5
Port Ethernet switch.
NEP-1
HDS Display
ENET Port
Lowrance broadband radar in the United States does not require a radar interface box. The scanner
connects directly the display or Ethernet switch via the adapter cable.
HDS (Non USA)
RI11
NETWORK port
Ethernet cable
000-0127-28
2 m (6 ft)
Optional Lowrance 5
port Ethernet switch.
NEP-1
HDS Display
ENET port
Lowrance Broadband radar outside the USA requires a RI11 interface box. This connects to HDS display
via Ethernet either directly into the ENET port on the display or by using an optional 5 port Ethernet
switch. An additional Ethernet cable will be required.
HDS NMEA 2000 Heading
SimNet heading sensor
FC40 or RC42
SimNet to NMEA2000 adapter
cable.
000-0127-45
HDS
NMEA 2000 port
16 | 2BWiring the radar system