Sigma Category 1 Automobile Alarm User Manual


 
Enable Super-Lock (Option 9 on the keypad)
Many vehicles are stolen when thieves break into your home and steal your car keys and
radio transmitter, perhaps while you are on holiday. Super-Lock works by temporarily
ignoring all radio transmitters.
Once Super-Lock has been enabled, only when the PIN code is entered into the keypad
will the security system disarm. There is of course a little inconvenience when you disarm
the security system yourself, because you must first trigger it in order to gain access to
the keypad. However Super-Lock does offer a very high level of security to your vehicle
whilst your radio transmitter is not in your possession.
To enable Super-Lock turn on the vehicle s ignition, give the radio transmitter button a
quick press, type 9 on the keypad and immediately turn off the ignition.
Arming the Security System After Enabling Super-Lock
After enabling Super-Lock you may arm the security system once in the normal
way using the radio transmitter.
Disarming the Security System After Enabling Super-Lock
To do this, enter the vehicle, the siren will sound, type your PIN code into the
keypad, the security system will disarm in the normal way.
All your radio transmitters will now function as normal.
Adjusting Door Open Warning Bleep Volume (Option * on the keypad)
To switch between loud and soft door open warning bleeps, turn on the vehicle s ignition,
type *on the keypad and immediately turn off the ignition.
12
X i. Universal Opins.qxd 24/09/2004 11:44 Page 14