Scytek electronic G-20 Automobile Alarm User Manual


 
Page 4 - G-20
Remote Arming
The system monitors 3 independent areas (
zones
) while armed: doors, hood/trunk, and shock sensor input.
To Arm the System:
1. Turn off the ignition.
2. Press Button 1.
· The siren will chirp once.*
· The doors will lock.
· The parking lights will flash once.
· The LED will turn On, to indicate the starter defeat is activated.
3. 5 seconds after Arming:
· The LED will start blinking to indicate that the doors and hood/trunk inputs are being monitored.
* During Arming, if the system detects a bad sensor or an open zone, the system will chirp 4 additional times and
ignore that input, but keep all other areas protected.
Once Armed, the alarm will trigger when any of the following occurs:
· The doors are opened.
· The hood or trunk is opened.
· The shock sensor detects an impact to the vehicle.
When the alarm triggers, the siren will sound, the horn will honk, and the parking lights will flash. If
the system is triggered by the doors, or hood/trunk, the system will alarm for 45 seconds. If triggered
by the shock sensor input, the system will alarm for 30 seconds.
In the event the alarm is triggered and remains triggered continuously by the same sensor or input
during a single arming cycle, that sensor or input will be automatically bypassed until the next time
the system is armed.
If the Shock Sensor detects a light impact to the vehicle, the siren will chirp 5 times as a warning
indication.
Remote Disarming
To Disarm the System:
Press Button 2.
· The siren will chirp twice.*
· The doors will unlock.
· The parking lights will flash twice and will remain ON for 30 sec..
· The dome light will turn on.**
· The LED will turn off.
* During Disarming, if the system was triggered while away from the vehicle, the siren will chirp 3 times, and the
parking lights will flash 3 times.
**If the optional Dome Light Activation Feature is installed
Passive Arming
When programmed for the optional Passive Arming feature, the system arms itself automatically, each time
the ignition is turned off and all of the doors, hood, and trunk are closed.
To start the Passive Arming Process:
System
Operation