Filter
Top Products
Plug-in Connectors 3-Pin White Door Lock Connector: Plug-in connector port for door lock
harness or optional door lock
relay module. · BLUE WIRE - negative unlock output (-) 500mA. · GREEN WIRE - negative lock out-
put (-) 500mA.
2-Pin Red Connector: Plug-in connector port for LED. Mount the LED in an area where it may be
easily seen from either side of the vehicle.
2-Pin Blue Connector: Plug-in connector port for valet switch. Mount the valet switch in an area
that is easily accessible from the driver’s position.
4-Pin White Connector : Plug-in connector port for dual stage shock sensor.
Jumper Selection
Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the
parking light polarity jumper will be visible next to the parking light relay. Set the jumper for the cor-
rect polarity output as described below, then reassemble the main unit case.
Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.
Left Pin + Center Pin = positive Right Pin + Center Pin = negative
default setting shown
Page 31 - Astra 777 Mobile
HHuummppeerr SSeettttiinnggss