Schumacher SE-1562A Automobile Battery Charger User Manual


 
7
MAINTENANCE INSTRUCTIONS11.
Before performing maintenance, unplug and disconnect battery charger 11.1
(see sections 6.7 or 7.6).
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil 11.2
from terminals, cords, and the charger case.
Servicing does not require opening unit, as there are no user-serviceable 11.3
parts.
STORAGE INSTRUCTIONS12.
Store charger unplugged, in an upright condition. Cord will still conduct 12.1
electricity until it is unplugged from outlet.
Store inside, in a dry, cool place (unless you’re using an on-board, UL 12.2
listed Marine Charger ).
Do not store clips on handle, clipped together, on or around metal, or 12.3
clipped to cables.
TROUBLESHOOTING13.
Problem Possible Cause Solution
Both Green and Yellow
LEDs are on.
Battery is close to fully
charge.
Just allow more time for
charging.
Green LED is on when
connected to a dis-
charged battery.
Battery is sulfated or
deeply discharged.
Keep the charger on the
battery for a few hours.
The Yellow LED will
aluminate. If not, call
customer service.
Green LED is on when
connected to a dis-
charged battery.
Wrong setting. Select the proper volt-
age setting.
ACCESSORIES AND REPLACEMENT PARTS14.
3899001235 - Alligator Clip
94030008 Quick Disconnect
Call: 800-621-5485