Filter
Top Products
2.3 Connect BT-48 to Your Pocket PC
1 Load 3 fully charged AAA NiMH batteries into BT-48; make sure the
batteries are loaded in their correct polarity (+or -) of the terminals.
2 Turn BT-48 on. The battery status LED will immediately be red to
indicate power success.
3 Secure your BT-48 in an unobstructed, open sky view and stable
place. If you use BT-48 in you vehicle, place BT-48 on the dashboard
with the front surface facing the sky.
4 To access Bluetooth communication between BT-48 and Pocket PC,
power on your Pocket PC first. After initializing, you will see the
Bluetooth icon on the right down corner on your screen.
www.sanav.com
12