Filter
Top Products
EB 5766 EN 3
General safety instructions
General safety instructions
4
The control valves may only be mounted, started up or serviced by fully
trained and qualified personnel, observing the accepted industry codes and
practices. Make sure employees or third persons are not exposed to any
danger.
All safety instructions and warnings in these mounting and operating
instructions, particularly those concerning assembly, start-up and
maintenance, must be observed.
4
The control valves fulfill the requirements of the European Pressure Equip
-
ment Directive 97/23/EC. Valves with a CE marking have a declaration of
conformity which includes information about the applied conformity assess
-
ment procedure. The declaration of conformity is available on request.
4
For appropriate operation, make sure that the control valve is only used in
applications where the operating pressure and temperature do not exceed
the operating values which are based on the valve sizing data submitted in
the order.
The manufacturer does not assume any responsibility for damage caused by
external forces or any other external influence!
Any hazards which could be caused in the control valve by the process
medium, the operating pressure, the signal pressure or by moving parts are
to be prevented by means of the appropriate measures.
4
Proper shipping and appropriate storage of the control valve are assumed.
Caution!
4
For installation and maintenance, make sure the relevant section of the
pipeline is depressurized and, depending on the process medium, drained
as well. If necessary, allow the control valve to cool down or warm up to
reach ambient temperature prior to starting any work on the valve.
4
The electric actuators have been designed for use in electrical power
installations. For wiring and maintenance, you are required to observe the
relevant safety regulations.
4
Only use power interruption devices which are protected against
unintentional reconnection of the power supply.
4
Take special care when making adjustments on live parts. Do not remove
any covers!