RoyalTek RGM-3600 GPS Receiver User Manual


 
8
RGM-3600 Operational Manual
RXA
This is the main receiver channel and is used for receiving software
commands to the board from SiRFdemo software or software written by
users themselves.
PS: Pull up if not used.
TXA
This is the main transmitting channel and is used for outputting navigation and
measurement data for SiRFdemo software or software written by users
themselves.
Boot
Set this pin to high for programming flash.
Cable connector
- 6Pin Male PS2 RS-232 Interface Pin Number:
- 6Pin Male PS2 TTL Interface Pin Number:
PDF 檔案以 "pdfFactory Pro" 試用版建立 [ www.pdffactory.com