Filter
Top Products
6
1.5 Operating Basics
Turning On and Off
Shift the power switch to “on” or “off” to turn your device on or off.
When you switch off the device, it actually enters into a standby state and
stops operating. Once you turn on the device again, it resumes.
1.6 Inserting an SD Card
Your device has an SD slot where
you can insert a Secure Digital or
MultiMediaCard storage card.
To use an SD card, insert it into the
slot, with the connector pointing to
the slot and its label facing the front
of the device.
To remove the card, first make
sure that no application is
accessing the it, and then slightly
push the top edge of the card to
release it and pull it out of the slot.
NOTE:
Make sure that the slot is not obstructed by other objects.
Keep the SD card in a well-protected box to avoid dust and humidity when
you are not using it.