Filter
Top Products
Installation Guide VW Series
Rosen Entertainment Systems Copyright 2010 All Rights Reserved
Installation Guide DP-VW0714HD Rev E
Page 5
Connect the Power and GPS Harnesses
The GPS Harness must be tightened with a WRENCH to ensure
it is properly seated.
Failure to follow this step may result in poor GPS signal
Connect Optional Harnesses such as iPod,
Satellite Radio, Camera, Reverse Sensors
These harnesses must be fully engaged prior to the system
installation.
See the Harness Diagrams for more information
Prepare the Vehicle side harnesses for
connection to the Rosen Harness
Use care not to pinch or damage cables as this will cause
performance issues/failures
CAUTION
Engage all Connectors to the Factory
Harnesses and attach the Rosen System
using the previously removed Mounting
Screws
Attach the system with 4 x T-20 Torx Screws
Turn the vehicle ON and confirm the unit is
fully operational
With the connectors Fully Engaged, turn the vehicle on
and press the RESET
for 5 seconds on the unit.
Insert a DVD to confirm the Video Disable
Circuit is properly Operating.
The Video Disable is provided by the CANBus in most VW
vehicles.
However, in some vehicles the Brake Wire must be
connected to the Park Brake Indicator Wire to complete a
ground when the brake is engaged.