Filter
Top Products
GPS-6017 Operating Manual
Rikaline
Rikaline International Corp. 14F, 171, Chen-Gong Road, SanChong City, Taipei 241, Taiwan
Tel: ++886 2 8973 1899 Fax: ++886 2 8973 1896 E-Mail: info@rikaline.com.tw
Web: www.rikaline.com.tw
10
4. USB Driver
4.1 System Requirements
IBM, Pentium or above and other compatible PC; 16 MB and above memory; Windows 98/Me/2000; VGA
Graphic Adapter.
4.2 Installation
4.2.1 Virtual COM Port Driver Installation Windows XP
Follow these steps to install the Windows XP VCOM driver:
1. Connect the USB cable between the host computer and the cable target device.
2. Windows will open a “Found New Hardware Wizard” window.
3. Select "Install from a list or specific location (Advanced)" and press Next.
4. Select "Include this location in the search".
5. Press Browse to locate the "C:\Rikaline\WIN" directory. Once this directory is selected press OK.
6. Verify that the correct path and filename are shown and press Next.
7. Press Finish to finish installing the "CP210x USB Composite Device".
8. Windows will open a second “Found New Hardware Wizard” window.
9. Select "Install from a list or specific location (Advanced)" and press Next.
10. Select "Include this location in the search".
11. Press Browse to locate the "C:\Rikaline\USB_Cable\WIN" directory. Once this directory is selected press
OK.
12. Verify that the correct path and filename are shown and press Next.
13. Press Finish to finish installing the "CP210x USB to UART Bridge Controller".
4.2.2 Virtual COM Port Driver Installation Windows 98 SE
Follow these steps to install the Windows 98 VCOM driver:
1. Connect the USB cable between the host computer and the cable target device.
2. Windows will open a “Found New Hardware Wizard” window. Press Next to continue.
3. Select "Search for the best driver for your device (Recommended)" and press Next.
4. Select "Specify a location".
5. Press Browse to locate the "C:\Rikaline\USB_Cable\WIN" directory. Once this directory is selected press
Next.
6. Verify that the correct path and filename are shown and press Next.
7. Press Finish to finish installing the "CP210x USB Composite Device".
8. Windows will open a second “Found New Hardware Wizard” window. Press Next to continue.
9. Select "Search for the best driver for your device (Recommended)" and press Next.
10. Select "Specify a location".
11. Press Browse to locate the "C:\Rikaline\USB_Cable\WIN" directory. Once this directory is selected press
Next.
12. Verify that the correct path and filename are shown and press Next.
13. Press Finish to finish installing the "CP210x USB to UART Bridge Controller".
4.2.3 Virtual COM Port Driver Installation Macintosh
To install the Macintosh OS-X virtual COM port driver, extract the cardinal-osx-V1_00c-release.zip file located
in the MACX directory created in "C:\Rikaline\USB_Cable" Next, run the extracted file SLAB_USBtoUART
Installer. To uninstall the driver, run the extracted file SLAB_USBtoUART Uninstaller.
Macintosh OS-9 virtual COM port drivers are currently available by request only.
4.2.4 Virtual COM Port Driver Installation Linux 2.40
The Linux virtual COM port driver included with the CP2102EK evaluation kit support Linux versions 2.40 and
later.
To install the driver, extract the cardinal-redhat9-V0_81a.tar file located in the LINUX directory created in
"C:\Rikaline\USB_Cable" Next, run the extracted file load_mcci_usb. To uninstall the driver, run the extracted
file
unload_mcci_usb.