Filter
Top Products
10
(Diagram D3)
Step 1 : Start by placing the bed rail on the side of the bed that you would like
to have protected. The Guide Bar Assemblies should be placed on top of the box
spring or platform that will support the mattress. The ‘ L’ shaped Anchors and straps
should be extended opposite the bedrail and mounted to the outer edge of the box
spring or platform. (Diagram D1)
You may need to release the strap locking buckles located on the under side of the
Guide Bar Assemblies. Ensure that the end of the anchor is pointing up. The
anchoring straps should not be twisted. If twisted, the anchoring straps will not tighten
properly. (Diagram D2)
(Diagram D2)
Step 2: Once the bed rail is properly placed, place the mattress on top of the
assembly. A properly placed bed rail should have the left and right Guide
Bar Assemblies parallel to one another, and perpendicular to the wall assenbly.
(Diagram D3)