Razor 155001 Motorcycle User Manual


 
Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Pocket Rocket was 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING:
Do not use your Pocket Rocket
for the first time until you have
charged the battery for at least
12 hours. Failure to do so may
damage your vehicle and void
your warranty.
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
POCKET ROCKET. The Pocket
Rocket has been built to certain
Razor design specifications. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible.
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied
tools only as a last resort.
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
4mm and 5mm
hexagonal key wrenches
(included)
Brake Lever
Brake Lever
Adjuster
Wheel
Tire
Back Brake
Adjuster
Speed Control
Drive
Chain
Charger
Charger
Plug
Charger
Port
Bicycle-style tire pump for
Schrader valve tires, with
pressure gauge
Charger Port
Front Fork
On/Off
Switch
Circuit Breaker
Circuit
Breaker