Rayming TN-206 GPS Receiver User Manual


 
9
Getting started
External Antenna Port
Your TN-206 is equipped with a Radio Frequency
(RF) connector port (MMCX type) for connecting
with an optional external active antenna when
operating under certain conditions, such as inside a
vehicle or where satellite signals are blocked from
the internal antenna facade.
LED Indicators
There are three LED indicators on your TN-206, and
they show the current status of Bluetooth
connection, GPS signal, and battery.
Bluetooth Status LED (Blue)
Blinking - Bluetooth radio is on and ready to
transmit.
GPS Status LED (Green)
Blinking - GPS position is fixed.
Steady light - GPS position is NOT fixed.
Battery Status LED (YELLOW/RED)
None - Running on battery power, and
battery has adequate power supply.
Constant Red - Running on battery power,
which is critically low. Recharge as soon as
possible.
Constant Yellow - Connected to power
charger, and battery is charging.