14 Raymarine SR100 Sirius Weather System - Installation Guide
3. Press the
Upgrade Remote Unit
soft key.
4. Press the
Upgrade Remote Unit on Ethernet
soft key.The Upgrade
progress meter appears.
5. Within 15 seconds of pressing the
Upgrade Remote Unit on Ethernet
soft key, power your Sirius Weather system ON.
The status bars will begin updating. If they do not begin updating
within 30 seconds, check:
i. that the correct software revision was selected.
ii. that the Sirius Weather receiver was powered ON within 15
seconds of pressing the
Upgrade Remote Unit on Ethernet
soft key.
iii. that the SeaTalk
hs
connection is intact.
6. When the update process is complete, remove the CF card from the
card reader slot.
7. Press the
REBOOT
soft key. Your E-Series display will restart
automatically.
Your Sirius Weather System and E-Series display are now ready for nor-
mal operation.
For full details of how to operate your Sirius Weather Application refer to
Raymarine Handbook No.
81244_2 E-Series Networked Display - Reference
Manual
. A copy of this manual is available from the relevant product pages
at www.raymarine.com
87067_1.book Page 14 Wednesday, February 22, 2006 7:44 AM
