Filter
Top Products
1
Drill
6mm (
1
/4 in)
Drill bit
20mm (
13
/16 in)
Drill bit
Phillips
screwdriver
Adhesive tape
What tools do I need to install it?....
Part No: R38103
Raystar RS125 GPS Receiver
Part No: E35018
Pole mount kit
Studs (x2)
Thumb nuts (x2)
Part No: R38104
10m (33ft) NMEA/SeaTalk
connection cable
Flush mount gasket
Screws (x2)
The Raystar RS125 GPS Receiver has no user serviceable parts.
D7471_2
3- way
Scotchlok
connectors (x5)
TM
Your handbook contains an explanation of how to install,
operate and maintain your Raystar RS125 GPS Receiver.
Intended Use
This product is a GPS antenna with a built-in position
fixing receiver using either NMEA0183 (Version 2.3 or
later), or Raymarine SeaTalk data output. The intended
application is for leisure marine boats and workboats not
covered by IMO/SOLAS carriage requirements.
Raystar 125 GPS Receiver
Owner's Handbook
www.raymarine.com
Welcome to the Raystar RS125 GPS Receiver
What's in the box?....