Filter
Top Products
12
CONNECTING POWER
Caution:
• Use only the supplied straight or coiled power cord. If your
power cord is lost or damaged, you can order a replace-
ment cord from your local RadioShack store.
• Before plugging the power cord’s cigarette-lighter plug into
your vehicle’s cigarette-lighter socket, make sure the plug’s
tip is screwed firmly onto the plug. See “Replacing the
Fuse” on Page 27 for more information about the cigarette-
lighter plug.
• Unplug the power cord’s cigarette-lighter plug from your
vehicle’s cigarette-lighter socket when you turn off the igni-
tion. This prevents your vehicle’s battery from being drained
if you leave the detector on when you turn off the ignition.
Plug the supplied straight or coiled power cord’s smaller barrel
plug into the detector’s power jack. Then connect the cord’s
larger barrel plug to the cigarette-lighter plug’s jack and insert
the plug into your vehicle’s cigarette-lighter socket.
Note:
If the detector does not operate when you turn it on,
remove the cigarette-lighter plug from your vehicle’s socket
and check the socket for ashes and other debris. Also check
the fuse in the cigarette-lighter plug and your vehicle’s fuse
block (see “Replacing the Fuse” on Page 27).