Filter
Top Products
12
OPERATION
TURNING THE DETECTOR
ON AND OFF
To turn on the detector, tap
P/V
.
The detector sounds a distinctive tone for each band as
a self test (laser, Ka, K, X, and road hazard, in order).
Then all indicators turn off except the power indicator,
and the detector returns to the same operating modes
as the last time you used it.
To turn off the detector, tap
P/V
again.
ADJUSTING THE VOLUME
To increase the detector’s volume, press and hold down
P/V
. The detector sounds tones and lights the signal
strength meter to indicate the relative volume level. To
decrease the detector’s volume, release and immedi-
ately press
P/V
again.
22-1659.fm Page 12 Friday, August 6, 1999 9:33 AM