Filter
Top Products
22
© 2005 directed electronics, inc. all rights reserved
pprrooggrraammmmiinngg ooppttiioonnss
Programming options control what your system does during
normal operation, and require few or no additional parts.
However, some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in
BBoolldd::
➤
AAccttiivvee
arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door has been
closed).
➤ Arming/disarming confirmation siren chirps
oonn
or off.
➤ The ignition controlled door lock feature on or off: With
this feature on, the doors will lock three seconds after the
ignition is turned on, and unlock when the ignition is
turned off. The system can also be programmed to prevent
the doors from locking when the ignition is turned on with
any door open. If your installer is programming the security
system with the Directed Bitwriter, ignition lock and unlock
are independent features and can be programmed separately.
➤ Passive door locking (with passive arming) or
aaccttiivvee ddoooorr
lloocckkiinngg
(only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.