Python 951 Automobile Electronics User Manual


  Open as PDF
of 48
 
32
© 2008 Directed Electronics. All rights reserved.
¢ Menu option descriptions
Auto keypad locks
Automatically locks the remote buttons when the buttons are not used for
SECONDS0REVENTShACCIDENTALvPRESSESOFTHEREMOTE
Press then to unlock the keypad.
Note: If the auto keypad lock feature is programmed On, the remote un-
locks when the vehicle ignition is turned Off. The remote stays unlocked to
ALLOWTIMETOEXITANDUNLOADTHEVEHICLEANDTHENLOCKTHEDOORSWITHTHE
remote. When the
button is pressed, the keypad auto lock feature
resumes normally.
Page On or Off and Power saves
7HENPAGINGISh/NvTHEREMOTECHECKSTHESTATUSOFTHESYSTEMEVERYFOUR
seconds, and reports any factory alarm triggers (if the system is within the
operating range and the factory alarm option is installed).
)NTHEPAGINGh/FFvSETTINGTHEREMOTEDOESnot check the status of the
system. In the paging Off mode the remote beeps when a button on the
remote is pressed.
)NTHEhBATTERYSAVERvMODETHEREMOTEGOESINTOSLEEPMODEIFNOBUTTONS
are pushed for 72 hours. The timer resets each time a button is pressed.
0AGE!LERT6IBE"EEP4ONE"OTHOR3CREENONLYs
Receive command confirmations on the remote with vibrations, beeps or
both, or with display only.
Remote start display: Clock, temperature and runtimes
!LLOWSYOUTOCHOOSEWHATISDISPLAYEDINTHETEXTDURINGTHEREMOTESTART
sequence. Clock displays the current time during remote start.
Temperature displays the current cabin temperature during the remote start.
Runtime displays the runtime remaining during the remote start.
 previous next