Filter
Top Products
9
© 1997 Directed Electronics, Inc.
Once the system has successfully started the motor, it will turn the climate
controls on. If cooling or heating of the vehicle is desired, you must preset the
controls to the desired temperature and turn the blower motor on. The motor
will run for the selected time and the parking lights will flash or come on solid
while the motor is running. (See programming Options page 13)
Shutting Down the Remote Start System
Pressing Buttons I and II again, during remote start operation, will shut down
the remote start system and the motor will turn off. You can also shut down
the remote start system by pressing on the brake pedal. You may want to
enter the vehicle and drive it without shutting off the motor. To drive the vehi-
cle without shutting down the motor:
1. Disarm the system (if armed) by pressing Button I on the
transmitter.
2. Enter the vehicle and turn the ignition to the run position.
3. Step on the brake pedal.
The remote start system will be shut down when you step on the brake.
However the motor will continue to run since the ignition has been turned on.
You may now operate the vehicle as usual.
1