PYLE Audio PLNVB26 GPS Receiver User Manual


 
Arrange cables so that no-one can tread on them or trip over them. Do not place
any items on the cable.
Working with memory card
This navigation system supports SD memory cards.
1)Inserting memory cards:
Carefully take the memory card out of its packing (if included). Take care not to
touch or dirty the contacts. Push the memory card carefully into the card slot. The
side of the memory card wearing the label must point upwards. The memory card
should slightly lock in place.
2)Removing memory cards
Do not remove the memory card while it is accessed. This could result in loss of
data.
To remove the card press lightly onto the upper edge until it ejects.
Pull the card out without touching the contacts.
Store the memory card in the packing or in another safe location. Memory cards are
very fragile.
Take care not to dirty the contacts and not to force the card.
3)Accessing Memory Cards
The appliance only supports memory cards in the FAT16/32 file format.
Data Exchange VIA Card Reader
You need a SD card reader to transfer or install map and software data. Insert the
card into SD card reader and copy the data directly to the card.
Resetting The Navigation System
This option restarts the navigation system without erasing the data installed. This
kind of reset is often used to reorganize the memory. After reset, all running programs
are interrupted and the working memory is reinitialized. Choose this option if your
navigation system is not responding or working properly.
Press reset button (4) will restart the navigation system.
Tips for Navigation
1) Do not manipulate the navigation system while driving to protect yourself and
others from accidents!
2) Only look at the display (not included in the package) when you are in a safe
driving situation!
3) Attention: The road layout and driving rules take precedence over the instructions
of the navigation system. Only follow the instructions when circumstances and
driving rules permit it!
4) The direction statements of the navigation system given do not release the driver
of the vehicle from his or her duty of care or personal responsibility.
5) Plan routes before you leave. If you want to play a new route whilst on the road
stop driving.
6) In order to receive the GPS signal correctly, metal objects may not hinder reception.
Attach the GPS antenna onto the inside of the windscreen or near the windscreen.
Try different positions in your vehicle in order to find the best reception
Notes for Use In A Vehicle
Take care that the cable does not impede any safety components. Do not mount
the components within the operating range of any airbags. Check all safety equipment
in your car after installation.
3
SAFETY INSTRUCTIONS