PYLE Audio PLD22 Automobile Accessories User Manual


 
User’s Manual- page 9
Initial System Start-Up
ESP Function
Be sure to press the button ( 12)
When using the unit for the first time,
after all connections are completed
correctly.
1. Turn off the unit power.
2. Press with a ballpoint pen or
similar pointed object.
Press button (1) or insert a disc to
turn on the unit.
When system is on, press button (1) to
turn off the unit.
1. Insert the disc into the disc slot (7)
with the printed side facing up. The
player will play the disc automatically.
2. Whenever press button (6) to eject
the disc.
Press button (26) to adjust
the volume level.
Press button (3) to switch to the
desired input source.
The mode will change each time the
button is pressed.
.
This unit features ESP (anti-shock)
protection. It works by “playing ahead”
and buffering the stored part of the
program, playing it back when the
realtime portion of the program has been
disrupted. Depending on the
listening/viewing mode you are in, the
amount of time of disruption which can be
hidden is as follows:
RESET
RESET
Turning Power On and Off
Loading/Removing a Disc
Adjusting the volume level
VOL+/VOL-
Input Source Select
MODE
CD, VCD: 18 seconds
MP3:160 seconds
DVD: 6 seconds
MPEG4: 20 seconds
GENERAL OPERATION
Last Position Memory Feature
- During disc playback, if you press
button (1) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
-During disc playback, if you press the
button (3) to switch to other mode,
and then return to DVD mode again, the
unit will resume playing from the point
that it was interrupted.
button on the housing must be
activated with either a ballpoint pen or
thin metal object. The button (12)
is to be activated at the following times:
-After initial installation of the unit when
all wiring is completed.
-Some of the function buttons do not
operate.
- Error symbol appears on the display.
Note:
If the unit still does not function after you
have pressed , try cleaning the
connectors which link the panel and the
main housing with a cotton swab
moistened with isopropyl (rubbing
alcohol). If it still does not work, bring the
unit to your dealer for servicing or advice.
MODE
RESET
RESET
RESET
Reset Function
DVD AV