Filter
Top Products
yellowblue
6-36
Headlamps
To replace one of your headlamps, do the following:
1. Remove the first bolt. Then remove the remaining
plastic fasteners holding the shield. Use the end of a
flat-head screwdriver to pull up the center of the
fastener. Be careful not to break the fasteners that
hold the shield in place.
2. Remove the bolt that anchors the headlamp
assembly. Pull the headlamp assembly toward the
front of the vehicle to access the bulb assembly.
3. Twist the bulb retainer one
-eighth of a turn
counterclockwise and pull the bulb assembly out.