Polaris X2 500 EFI Offroad Vehicle User Manual


 
79
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 75. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
The a-arms and upper control arms are lubricated at the factory,
and no additional lubrication will be needed. However, if these
components are subjected to severe use, grease zerks have been
provided for additional lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Inspection Procedure
Engine Oil PS-4 PLUS
Performance
Synthetic 2W-50
2 qt. (1.9 l) See page 80.
Brake Fluid DOT 4 Only --- See page 32.
Transmission Oil Polaris AGL Syn-
thetic
Gearcase Lube
32 oz. (948 ml) See page 88.
Demand Drive
Fluid
(Front Gearcase)
Demand Drive LT
Premium Fluid
9.3 oz. (275 ml) See page 89.
ADC Fluid Polaris ADC Fluid --- See page 90.
Front Prop Shaft
Yoke
Polaris Premium
U-Joint Lube
--- Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of stor-
age, or after pressure wash-
ing or submerging.
Front Prop Shaft Yoke