Filter
Top Products
93
MAINTENANCE
Clutch System
Torque Stop
If your snowmobile is
equipped with an engine
torque stop, periodically
check torque stop clearance.
With clutches in proper
alignment, the torque stop
clearance should be .010-
.030 inch (.25-.75 mm) from
the engine case.
Adjust if necessary, and lock
the jam nut.
Reverse Maintenance
If your snowmobile is equipped with reverse, or if you have a reverse kit
installed, it's especially important to maintain track tension as specified
on page 96.
WARNING! Improper track tension can cause serious damage to the
snowmobile, which can result in loss of vehicle control and serious injury or
death. Always maintain the track tension as specified.
Allow the engine to reach idle speed before attempting to shift into or
out of reverse.
NOTICE: Damage will occur to chaincase or transmission if shifting is attempted
before the machine has come to a complete stop. Make sure the
snowmobile has completely stopped and the engine has returned to
idle speed before shifting gears.
.010-.030 in.
(.25-.75 mm)