Polaris SuperSport Offroad Vehicle User Manual


 
95
MAINTENANCE
Clutch System
To r q u e S to p
If your snowmobile is equipped with
an engine torque stop, periodically
check torque stop clearance.
With clutches in proper alignment,
the torque stop clearance should be
.010I-.030I (.25-.75 mm) from the
engine case.
Adjust if necessary, and lock the jam
nut.
Chain Tension
Maintain the proper chain tension as outlined on page 84.
Fall Tune-Up
For maximum performance, arrange for a fall service tune-up with your
Polaris dealer. His experienced and trained service technician will keep
your machine in peak operating condition.
To o l K i t
A tool kit is included with each machine for emergency and routine
maintenance. Always keep the tool kit with the snowmobile.
.010-.030I
(.25-.75 mm)