Filter
Top Products
71
STARTING THE ENGINE
1. Set the parking brake.
2. Turn the fuel tank valve to ON.
3. Sit on the vehicle.
4. Attach tether strap to machine and wrist.
5. Turn the engine stop switch to RUN.
6. Turn the ignition key to ON.
7. Press the starter button. NOTE: The rear brake lever must be engaged or the en-
gine will not start.
8. Do not press the throttle while starting the engine.
9. Activate the starter for a maximum of five seconds, releasing the button when the
vehicle starts. If engine does not start, release the starter and wait five seconds;
then activate the starter for another five seconds. Repeat this procedure until en-
gine starts.
After the engine starts, vary the engine RPM slightly with the throttle to aid in
warm up until the engine idles smoothly.