Filter
Top Products
42
FEATURES AND CONTROLS
Instrument Cluster
Multi-Function Display (MFD) Gauge (EPS Models)
The rider information center is located in the
instrument cluster. All segments will light up
for one second at start-up. If the instrument
cluster fails to illuminate, a battery over-volt-
age may have occurred and the cluster may
have shut down to protect the electronic speed-
ometer. If this occurs, take the ATV to your
Polaris dealer for proper diagnosis.
The information center is set to display standard units of measurement
and a 12-hour clock at the factory. To change to metric and/or a 24-hour
clock, see page 45.
1. Gear Display -
This area displays
gear shifter posi-
tion.
H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
-- = Gear Signal
Error (or shifter
between gears)
2. Information
Display - This area
displays odometer,
tripmeters, engine
hour meter and programmable service hour interval.
3. Speed Display - This area displays vehicle ground speed or engine
speed. See page 44.
1
3
4
8
7
5
9
6
10
11
2
5
6
12
13