Filter
Top Products
40
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
2. Fuel Gauge - The segments of the fuel gauge show the level of fuel
in the fuel tank. When the last segment clears, a low fuel warning is
activated. All segments including the fuel icon will flash. Refuel
immediately.
Tip: If the fuel icon fails to display, an open or short circuit has occurred in the
fuel sensor circuit. See your dealer.
3. Information Display Area - This area displays odometer, trip
meter, engine hour meter and programmable service hour interval.
4. Under / Over Voltage - This warning usually indicates that the
vehicle is operating at an RPM too low to keep the battery charged.
It may also occur when the engine is at idle and high electrical load
(lights, cooling fan, accessories) is applied. Drive at a higher RPM
or recharge the battery to clear the warning.
5. Clock - The clock displays time in a 12-hour or 24-hour format. See
page 42 for resetting instructions.
6. Service Indicator - A flashing wrench symbol alerts the operator
that the preset service interval has been reached. The vehicle should
be brought to your dealer for scheduled maintenance. See page 42
for resetting instructions.
7. 4X4 Indicator - This indicator illuminates when the 4X4 system is
engaged (switch is on 4X4).