Filter
Top Products
109
MAINTENANCE
Cooling System
Coolant
The coolant supplied in the system is a 60/40 mixture of ethylene-glycol
and distilled water. This mixture provides protection against freezing.
Contact your dealer if greater protection is required.
Use Premium 60/40 anti-freeze coolant, which is already premixed and
ready to use. Do not dilute with water. Never exceed a 60% antifreeze/
40% water mixture. See page 137 for the part numbers of Polaris prod-
ucts.
Tip: Never add tap water to the cooling system. Minerals cause deposits and
may react adversely with the metals in the engine and cooling system.
Use of a non-standard pressure cap will not allow the recovery system to
function properly. If the pressure cap needs replacement, contact your
dealer for the correct part.
n Coolant Level
The engine coolant level is controlled
by the recovery system. The recovery
system components are:
• Coolant reservoir bottle
• Coolant overflow tank
• Filler neck
• Pressure cap
• Connecting hoses
Always maintain the coolant level at
the “COLD FILL” mark on the cool-
ant overflow tank (when the engine is cold).
NOTICE: Operating the snowmobile with insufficient coolant will result in
overheating and serious engine damage. Always maintain the coolant
level as recommended.
CAUTION
Steam and hot liquids will cause burns to your skin. Never remove the pres-
sure cap when the engine is warm or hot.
“COLD FILL”
Mark