Filter
Top Products
109
MAINTENANCE
Engine Oil
Oil Change
26. Add additional oil to bring the level slightly above the lower mark
(in the safe operating range) on the dipstick. See the chart for
approximate amounts to add at this step. DO NOT OVERFILL.
NOTE: Check the oil level often during the fill procedure to avoid overfilling. If
the filling and checking procedure is not completed within three min-
utes, reinstall the dipstick. Restart the engine and allow it to idle for no
more than 20 seconds to circulate the oil back into the tank. Continue
adding and checking the oil until the level is slightly above the lower
mark (in the safe operating range) on the dipstick. Do not overfill.
27. Reinstall the dipstick.
MODEL
OIL TO ADD AT STEP 26
Ounces Milliliters
All 24 to 32 710 to 496