Filter
Top Products
135
Maintenance
Drive Chain Slack Adjustment
1. Loosen the four rear housing mount
bolts.
2. Loosen the chain adjuster lock nut.
3. Turn the chain adjuster clockwise to
1/4"-1/2" (6-12 mm) deflection.
4. Tighten the chain adjuster lock nut to
18 ft. lbs. (25 Nm). Hold the adjuster
stud securely while tightening the nut
to avoid breaking the stud.
5. Tighten the four rear housing mount
bolts to 43 ft. lbs. (60 Nm).
Housing
Mount
Bolts
Chain Adjuster