60
MAINTENANCE
Brakes
The front and rear brakes are hydraulic disc brakes. Both brake systems
are self-adjusting.
Brake Inspections
Perform the following checks to keep the brake systems in good operat-
ing condition. Check more often if brakes are used heavily under normal
operation.
1. Always keep brake fluid at an
adequate level. See page 58.
2. Check the brake systems regularly
for fluid leaks.
3. Check the brakes for excessive
travel or spongy feel.
4. Check the friction pads for wear,
damage and looseness. Replace
the pads when the friction mate-
rial is worn to 1 mm.
5. Check the security and surface
condition of the disc.
1 mm